H05Z1-K 1 x 0,75mm2 (300/500V)

Kabeln är främst avsedd att användas för fast skyddad installation av signal- och reglerkretsar i apparater.
Se teknisk information nedan och i bifogat produktblad.

Förpackning: Ring, 200 meter

TEKNISK INFORMATION

Nominal cross-section area: 1 x 0,75mm2
Insultation thickness: 0,6mm
Overall diameter: 2,4mm
Maximum Electrical resistance at 20ºC): 26

• Standards (construction/tests): EN 50525-3-31 and UNE 211002.
• Technical designation: H05Z1-K / ES05Z1-K (AS).
• Construction: Conductor: Copper, class 5 / Insulation: Thermoplastic polyolefin, type TI 7 (LSZH).
• Rated voltage (Uo/U): 300/500 V AC.
• Max. conductor temperature. Normal operation / short-circuit (t≤5s): 70ºC / 160ºC.
• Range: Single wire (1x). Cross-sectional area: 0.5 / 0.75 / 1 mm2 .
• Reaction to fire classification (CPR - EN 50575 & EN 13501-6): Cca-s1b,d1,a1.
• Other fire performance features (when CPR Regulation is not applicable): Flame retardant, fire retardant, halogen-free and low gas and
smoke emission with low opacity/toxicity/corrosivity/conductivity (IEC 60332-1-2, IEC 60332-3-24, IEC 60754-1, IEC 60754-2 and IEC 61034-2).
• Applications: Especially recommended for the internal wiring of switchboards, panels and/or electrical devices in public access premises
(hospitals, airports, schools...), tunnels or any other installation that requires the aforementioned special performance in case of fire.
Fixed installation protected inside appliances and in lighting fixtures. It is suitable for installation in surface-mounted or embedded conduits
when used only for signalling or control circuits.


Temperature ranges:
• Maximum continuous conductor operating temperature: +70 ºC.
• Maximum continuous conductor short-circuit temperature (t≤5s) : +160 ºC.
• Maximum ambient temperature: +60 ºC. • Maximum cable surface temperature: +70 ºC
• Maximum storage temperature: +40 ºC. • Minimum installation and handling temperature: +5 ºC.
• Minimum ambient temperature: −30 ºC (static, permanently installed, protected against mechanical damage, without exposure to movement, mechanical damages, shocks, or vibrations).

— Minimum bending radius at 20 °C +/−10 °C (mm): 4xD. D = cable overall diameter (mm).
— Maximum pulling tension during installation and handling: Applied on copper conductors F = 15xS (N).
"S" = cross-sectional area of cores (mm2 ).